A burst supply line, an overflowing tub, or a storm surge under the back door doesn't wait for business hours, and neither do we. Hirex Water Damage sends licensed technicians straight to your Frisco address with extraction equipment already loaded and running.
Hirex Water Damage started because homeowners in Frisco, TX kept telling us the same story: a national hotline picked up, put them on hold, and then subcontracted the job out to whoever was cheapest and closest. Every technician on our Frisco roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Each lead tech holds an IICRC Water Restoration Technician certification and has personally handled clean-water, gray-water, and contaminated black-water losses, so Water Damage Repair in Frisco isn't a side service we tacked on — it's the reason the company exists. We carry full general liability coverage and are licensed to operate throughout Frisco, TX, so you're protected from the moment our truck pulls into the driveway.
We keep a stocked warehouse inside Frisco, TX so equipment never has to be trucked in from another region, which is the difference between a 45-minute arrival and a next-day one.
Ask any Frisco property manager who has dealt with a burst supply line at 3am — the difference between a crew that shows up ready and one still loading a truck at the shop is measured in gallons of water soaking into your subfloor. That's the gap Hirex Water Damage was built to close, one Frisco call at a time.
Not every leak announces itself with a flooded floor. A lot of the worst damage we see in Frisco started small and got ignored for weeks. Here's what tells us a property needs professional attention rather than a mop and a fan:
If you're nodding along to any of these, get ahead of it now rather than later — our Frisco dispatcher will give you an honest read on urgency, not a sales pitch.
Whether it's one bedroom carpet or an entire flooded commercial floor, our Frisco crews scale the response to match the loss — nothing gets a cookie-cutter response.
Our Frisco units run truck-mount extraction pumps that pull thousands of gallons per hour, cutting standing-water time from days to hours. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
We place industrial dehumidifiers and air movers based on actual psychrometric calculations, not a standard equipment count per room, with daily drying logs so you can see the numbers improving, not just take our word for it.
For Frisco homeowners, that means drywall removal at the flood cut line, subfloor assessment, and content pack-out for anything that can be saved, with clear photo documentation at every stage for your insurance claim.
Multi-unit and commercial Frisco properties get their own project manager plus enough drying equipment to cover the real square footage, not a token setup — we know a flooded lobby or a leaking unit above tenants below has to move fast.
When a Frisco job involves sewage backup, our team suits up in full PPE, applies EPA-registered antimicrobials, and safely disposes of porous materials that can't be saved.
We apply antimicrobial treatment during every Frisco drying job specifically to head off mold before it starts, and we'll flag any area that needs deeper remediation.
We quote the job before equipment gets plugged in, so there's no surprise line item buried in the final invoice.
Because our equipment cache sits inside Frisco, TX, most Frisco calls see a technician on-site in under 60 minutes.
Our paperwork is built to match what adjusters expect, and we'll speak with your insurer directly on your behalf.
If moisture readings aren't where they should be at the end of the job, we come back and keep drying at no extra charge.
A short call with our Frisco dispatcher tells us whether this is a one-room job or a multi-crew response before anyone drives out.
Our nearest available Frisco crew is dispatched immediately with truck-mount extraction gear on board.
Standing water comes out first; drying equipment gets placed only after we've mapped exactly where moisture is hiding.
Daily moisture checks continue until every affected material reads dry, and you get a complete report at the end.
Our Frisco technicians use moisture meters at the start and the end of every job, and the final number has to hit the dry standard before we leave. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
You'll find that exact commitment printed on your Frisco paperwork, not just mentioned over the phone. If a second visit is ever needed, it comes from the same crew that handled the original job whenever scheduling allows, since they already know the property and the readings we started from.
"Our water heater let go at midnight and a Hirex Water Damage tech was pulling water out of the hallway by 1am. Fast doesn't begin to cover it." — Danielle R.
"They dealt with my insurance adjuster directly and I didn't have to translate a single restoration term myself." — Marcus T.
"They showed me the daily moisture readings so I wasn't just trusting a stranger's word that the house was dry." — Priya S.
"They worked overnight so our restaurant wasn't closed longer than it had to be. That mattered a lot to us." — Aaron W.
"Sewage backup is not a fun call to make, but the crew treated it professionally and explained the whole containment process." — Lena G.
"What they quoted up front is what I paid. No hidden equipment fees." — Sam O.
Local staging inside Frisco, TX typically gets a Frisco technician on-site inside an hour or two, depending on traffic and time of day.
We always quote first. You'll see a written estimate for the Frisco job before any drying equipment starts running.
Our Frisco on-call rotation covers water extraction, drying, and blackwater cleanup any hour of the day or night.
We build our paperwork specifically to match what adjusters need and will speak with your insurer on your behalf.
Dryness is confirmed with instrument readings against a documented dry standard, not just by feeling the wall or carpet.
Yes, our Frisco crews are trained and equipped for Category 3 blackwater response, including PPE and antimicrobial treatment.
If it's safe, shut off the water source, move electronics and valuables away from the affected area, and avoid the space if standing water is near outlets.
Yes, we regularly respond to commercial and multi-unit losses in Frisco, including retail, restaurants, and office space.
Drying time varies with material and how quickly extraction started, but 3 to 5 days is typical for most Frisco jobs.
Quick extraction and drying in Frisco significantly lowers mold risk, since spores need sustained moisture over roughly a day or two to establish.
Yes, if moisture readings aren't at dry standard when we finish, or a callback shows lingering moisture within 30 days, we return at no extra charge.
We cover Frisco and the surrounding zip codes listed below, plus neighboring communities throughout Frisco, TX.
Beyond Frisco itself, our coverage extends across nearby zip codes, with additional Frisco, TX crews available for large-scale or commercial losses. If your address falls inside or near Frisco, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for Frisco, Frisco, TXReach our Frisco line directly and get a technician on the way today.
Call +1-844-578-1604